The previous post on border vacuums discussed what borders were, why some borders create vacuums, and how these vacuums have affected Baltimore. This post will discuss solutions for at-grade border vacuums like parking lots and vacant lots, and over the coming months we'll discuss solutions for other kinds of border vacuums and see if they could apply to Baltimore.
New York's High Line Park |
Of course, no solution is a silver bullet. The fine print is context.
For example, architect Witold
Rybczynski, noting how many cities want to
emulate New York's High Line
Park (formerly an abandoned railroad
viaduct that had devolved into a border vacuum), argued that the city's
vibrant, dense, mixed-use Meatpacking and Chelsea districts made the High Line
successful, and that the opposite strategy of “build it and they will come” –
plop a High Line in an isolated area and hope that the vibrant urban fabric
follows – would likely garner disappointment.
Finally, my intention is not to take
a “fix it all now” position. These ideas are presented under the auspices of
long-term incremental improvement – that of incorporating more thoughtful
design when infrastructure and facilities are inevitably repaired, replaced,
expanded, added, or removed. Perhaps this way border vacuums can be gradually
dissolved rather than maintained by periodic reconstruction of the status quo.
Infilling parking lots and vacant lots
Parking lots and vacant lots are
arguably some of the most corrosive border vacuums: they break the continuity
of street walls by exposing party walls (“missing teeth”) and creating an
atmosphere of dereliction. The effect is particularly destructive in rowhouse
neighborhoods where the fabric relies on the appearance of continuity for
stability.
Fortunately parking lots and vacant
lots are also some of the easiest border vacuums to dissolve (if the demand for
infill is there, of course) and their infilling has generally been greeted with
enthusiasm in Baltimore. But what exactly constitutes good infill?
1111 Light Street in Federal Hill |
By doing all this, good infill will
form an engaging “street wall” that defines the street as a public room (see
above). To avoid breaking this street wall, parking lots and garages should be
stashed in back and accessed by alleys. Furthermore, good infill should be
composed of small blocks punctuated by continuous street networks. These
streets can be made quite intimate, further enriching the pedestrian experience.
Finally, good infill will feature a small
increment of development: rather than being built by one developer in a
short time, multiple blocks of good infill are composed by many people who have
contributed different buildings over a long time. This results in an organic
form that can accommodate Jane Jacobs' aged buildings: “A district must
mingle buildings that vary in age and condition [to] incubate diversity. If a
city has only new buildings, the enterprises that can exist there are limited
to those that can support the high costs of new construction. Mingling of new
and old buildings, with consequent mingling in living costs and tastes, is
essential to get diversity and stability in residential populations [and]
enterprises (Chapter 10, The Death and Life of Great American Cities).”
Infill examples
The Merchant Point Townhomes in Fell's Point |
The Merchant Point Townhomes at Aliceanna and Ann Streets
in Fell's Point are an example of good lowrise (rowhouse) infill. Built atop
the site of the historic St. Stanislaus Kostka complex, the rowhouses offer
attractive steps, overhangs, discrete windows, and other friendly, human-scale
details to the sidewalk, just like traditional rowhouses. The garages were
placed in the back (accessed by an alley) to avoid sacrificing the Aliceanna
Street facades to blank garage doors.
However, I think these rowhouses
could have done a better job “turning the corner” at Ann Street. Right now the
corner rowhouse offers just one first-floor window to Ann. If the garage in
that corner rowhouse had been sacrificed for a wraparound storefront, these
rowhouses would have done a better job connecting to the buildings along Ann,
improving pedestrian delight and block continuity in the process. In fact, the
19th century rowhouse on the northwest corner of the same
intersection is a perfect example of just such a strategy.
I've noticed that this lost
opportunity for “turning the corner” is surprisingly common among recent infill
rowhouses. The porosity of the primary (front) facade is usually quite good,
but that of any secondary (side) facades could be better. If too many infill
projects treat their secondary facades as an afterthought, there is the risk of
turning the streets along those facades into “B” streets that are less
desirable for pedestrian exploration, potentially fraying the connections
between different streets (and neighborhoods!) in the process. This is rather
unfortunate because Baltimore has many old rowhouses that do a
wonderful job “turning the corner,” and they
could be useful examples for future infill rowhouses.
The Twelve09 Condominiums at Preston and Charles Streets
in Midtown-Belvedere are an example of good midrise infill. Built atop a former
parking lot, this mixed-use building avoids the blank wall effect along Charles
Street by using a retail liner (built out to the sidewalk) to conceal the
structured parking in the center of the block. The building's facade also
employs numerous details, like bays and balconies, to maintain pedestrian
interest.
The Twelve09 Condominiums in Midtown-Belvedere |
Perimeter blocks in Hamburg, Germany |
Finally, I think the Hilton superblock next to Camden Yards is an example of “meh” highrise infill. Although it was built atop former parking lots, some of the complex's street-level facades offer little to the pedestrian. True, the eastern block offers several restaurants, but the western block's southern facade offers only blank walls, grilles, and garage doors – right across from Camden Yards! I think these shortcomings could have been avoided if the Hilton had been built in a perimeter block format (see right): one or two portals leading to a central “backstage” area would have eliminated the need for dispersed service doors, garage doors, and other infrastructure on the perimeter, leaving it free for pedestrian-friendly programming.
What if a parking lot or vacant lot
can't be infilled?
It would be ideal to infill as many
parking lots as possible, but for various reasons some parking lots can't be
infilled, at least not right away. How can we mitigate their border vacuums in
the meantime?
The conventional strategy for
shielding pedestrians from parking lots is to enclose them with low walls. But
these boring walls do nothing to enliven the street. It may be preferable to
enclose parking lots with liner
buildings. Even narrow liner buildings can
accommodate mixed uses or rowhouses. It's also possible to redesign parking
lots as multipurpose
plazas. That is, the lots could be
enclosed, paved, planted, and furnished in a manner such that they could be
used as public rooms in which cars would be permitted to park when there is
little activity. (For example, perhaps someday the Waverly Farmer's Market
parking lot could be improved this way.)
It's not always possible to infill
some vacant lots either. If the infill demand isn't there yet, how can we
mitigate their border vacuums in the meantime?
Some vacant lots can be turned into
community gardens, patios, side-porches, and parklets, and the “missing tooth”
appearance can be remedied by extending
the street wall across them (see pages
28-32). Nevertheless, these strategies have their limits. Turning too many
vacant lots into parklets risks diluting recreational activity – and
maintenance efforts – over too large an area; it's better to concentrate that
activity in a handful of parklets.
The next installment will discuss
solutions for more at-grade borders (like arterial roads). Subsequent posts
will discuss solutions for sunken borders (like highway and railroad trenches),
elevated borders (like highway viaducts and railroad embankments),
congregational borders (like arenas, sports facilities, and convention
centers), superblock borders (like hotel, office, and parking complexes),
Radiant City/Garden City borders (like tower-in-the-park housing projects,
garden apartment housing projects, office parks, strip malls, and big-box
facilities), campus borders (like hospital and university complexes),
recreational borders (like parks and cemeteries), and various other borders
(like prisons), so stay tuned!
- Marc Szarkowski
- Marc Szarkowski